Annual Tier II reporting is something facilities should stay ahead of, especially with the March 1 deadline coming around every year.
I recommend reviewing the chemical inventory early enough to determine what may need to be reported, prepare the filing, and work through the submission process before the deadline approaches.
If you are unsure whether Tier II applies to your facility, EBI can help you get started.
Tier II Reporting and Annual Planning at a Glance
Tier II reporting is the annual submission of hazardous chemical inventory information under Section 312 of the Emergency Planning and Community Right-to-Know Act, commonly called EPCRA. Covered facilities report qualifying chemicals that were present during the previous calendar year. The report is due by March 1 and goes to the State Emergency Response Commission (SERC), Local Emergency Planning Committee (LEPC), and local fire department with jurisdiction over the facility.
At the federal level, EPA’s hazardous chemical inventory reporting guidance explains that the analysis generally begins with chemicals for which a facility must maintain a Safety Data Sheet. Most hazardous chemicals have a 10,000-pound reporting threshold. For an Extremely Hazardous Substance, the threshold is 500 pounds or the applicable Threshold Planning Quantity, whichever is lower. State, Tribal, and local requirements may be more stringent.
EBI supports the process by reviewing facility information and chemical inventories, helping determine what may need to be reported, organizing quantities and storage details, preparing the filing, and supporting submission through the applicable reporting system.
Why Tier II Reporting Matters Now
For chemicals present during calendar year 2026, covered facilities must submit the annual Tier II report by March 1, 2027. EPA identifies the 2017-2026 Tier II form as the form for reporting year 2026. Facilities preparing for the filing cycle should use the months before the deadline to review current inventory data, Safety Data Sheets, maximum quantities, storage locations, facility contacts, and the reporting procedure for each jurisdiction.
Starting early does not change whether a chemical is reportable. It gives the facility time to identify incomplete or conflicting information, confirm which reporting system applies, and resolve questions before the filing window becomes compressed.
For stakeholders who manage EHS, environmental compliance, facility services, property operations, or chemical inventory data, this early review also creates a clearer division of responsibility. The people who know the equipment and materials can confirm the facts while the filing team prepares the report.
How Tier II Reporting Connects to Facility Operations
Facilities sometimes associate Tier II reporting only with chemical manufacturing. The practical question is broader: which hazardous chemicals were present, what were the maximum amounts at any one time during the reporting year, and what reporting requirements apply in that jurisdiction?
Diesel fuel for emergency generators, propane, compressed gases, battery systems, water-treatment chemicals, cleaning and maintenance products, laboratory chemicals, bulk oils, and manufacturing materials may all warrant review. The presence of one of these materials does not automatically create a filing requirement, but it gives the facility a reason to compare the inventory with the applicable thresholds and exemptions.
Start With the Federal Applicability Review
The federal review generally looks at whether the facility must maintain an SDS for the chemical and whether the maximum quantity present at any one time met or exceeded the applicable reporting threshold during the reporting year. Most hazardous chemicals use the 10,000-pound threshold. Extremely Hazardous Substances use 500 pounds or the applicable Threshold Planning Quantity, whichever is lower.
Those thresholds are a starting point rather than a complete facility-specific conclusion. Chemical classification, mixtures, exemptions, and other facts can affect the analysis, so the review should stay tied to the actual inventory and current source information.
Confirm State and Local Reporting Procedures
States can add chemicals, set lower thresholds, require additional information, collect fees, or use their own reporting systems. A state portal may distribute the filing to local recipients, but the facility should confirm whether the LEPC or fire department requires a separate submission or acknowledgment. EPA maintains current state Tier II reporting requirements and procedures.
For organizations with facilities in more than one state, this step matters because the data may be similar while the portals, forms, fees, and local delivery procedures differ.
What a Tier II Review Helps a Facility Do
A Tier II review connects the chemical inventory to the reporting analysis before the filing is prepared. It gives the team a structured way to confirm what was stored, how much was present, where it was located, and whether the facility information and contacts remain current.
Connect the Inventory to the Reporting Analysis
A useful review brings together the current chemical inventory, Safety Data Sheets, equipment information, storage details, and maximum quantities. The goal is to work from the facility’s actual operating information rather than assumptions or a copied list from the prior year.
Revisit Changes Since the Last Filing
A new generator, fuel tank, battery backup system, chemical product, laboratory process, storage area, or supplier can change the information behind the report. Changes to emergency contacts, ownership, facility names, or site configuration can also require updates even when the chemical list looks familiar.
Create Time to Resolve Missing Information
Facilities do not always keep every quantity, SDS, storage description, or contact detail in one place. Beginning the review early creates time to reconcile records, ask the right internal questions, and confirm state-specific fields before the report reaches the certification and submission stage.
Why Last Year’s Tier II Report May Not Be Enough
A prior-year report can provide a useful baseline, but it should not replace a current review. Tier II reporting is based on the maximum amount present at any one time during the reporting year, not only the amount on hand when the next report is prepared.
A facility may have changed equipment, products, suppliers, quantities, storage locations, or emergency contacts during the year. A temporary increase or seasonal inventory can also matter even when the current amount is lower. Reviewing those changes before carrying forward the prior report helps the filing reflect the facility’s actual 2026 operations.
How EBI Supports Tier II Reporting
EBI helps clients bring facility information, chemical inventory data, applicability review, and submission into one coordinated process. We focus on the facility’s current information and the reporting procedure for each jurisdiction.
Review Chemical Inventories and Facility Information
We review the available chemical inventory, Safety Data Sheets, equipment and storage information, prior reports, facility details, and contacts. This step helps identify missing or outdated information before the filing is prepared.
Determine What May Need to Be Reported
We compare the facility’s information with the applicable federal and jurisdiction-specific reporting framework and help identify which chemicals require further evaluation or inclusion in the report. When questions remain, we work with the client to confirm the underlying quantity, product, or storage information.
Prepare and Support the Submission
EBI organizes the report data, prepares the filing, and supports submission through the applicable reporting system. That work can include chemical names, hazard classifications, maximum and average daily quantities, storage methods, storage locations, and current facility and emergency-contact information.
Coordinate Reporting Across Multiple Facilities
For organizations managing more than one location, EBI can help coordinate annual reporting across a portfolio while accounting for the procedure that applies in each state. A consistent internal process can make it easier to collect facility data, track open items, and prepare each submission without treating every site as an unrelated effort.
When to Contact EBI About Tier II Reporting
A useful time to contact EBI is when your team begins assembling the current-year chemical inventory or identifies changes in facility operations during the reporting year. New generators, tanks, battery systems, chemicals, storage areas, sites, or contact changes can all raise questions that are easier to resolve before the March 1 deadline approaches.
Early coordination is also useful when federal applicability is unclear, the state has different requirements, the prior report may be incomplete, or multiple locations follow different filing procedures. EBI can help define the information needed and move the review into a clear reporting process.
Frequently Asked Questions About Tier II Reporting
What Is Tier II Reporting?
Tier II reporting is the annual submission of hazardous chemical inventory information under EPCRA Section 312. Covered facilities report qualifying chemicals from the previous calendar year to the applicable State or Tribal Emergency Response Commission, Local or Tribal Emergency Planning Committee, and local fire department with jurisdiction over the facility.
When Is the Tier II Reporting Deadline?
The federal deadline is March 1 each year for chemicals present during the previous calendar year. The report for calendar year 2026 is due by March 1, 2027.
Which Facilities May Need to File a Tier II Report?
The federal analysis generally applies when a facility must maintain Safety Data Sheets for hazardous chemicals and those chemicals were present at or above an applicable threshold during the reporting year. State, Tribal, and local authorities may apply more stringent requirements or request additional information.
What Federal Tier II Reporting Thresholds Apply?
The general federal threshold is 10,000 pounds for most hazardous chemicals. For an Extremely Hazardous Substance, the threshold is 500 pounds or the applicable Threshold Planning Quantity, whichever is lower. Facility-specific facts, exemptions, and state rules still need to be reviewed.
What Information Is Included in a Tier II Report?
The federal form includes facility identification, emergency contacts, chemical names and hazards, maximum and average daily quantities, storage methods, and storage locations. States may require additional fields, documents, fees, or certifications.
Can a Facility Reuse Last Year's Tier II Report?
A prior report can serve as a starting point, but the facility should review current chemicals, maximum quantities, equipment, storage locations, contacts, and jurisdictional instructions before filing. Copying the prior report without that review can carry outdated information forward.
Are Tier II Requirements the Same in Every State?
No. States can add chemicals, lower thresholds, request more information, collect fees, and establish their own forms or reporting systems. Each facility should follow the current procedure for the state, territory, or Tribal jurisdiction where it is located.
Can EBI Support Tier II Reporting for Multiple Facilities?
Yes. EBI can help organizations review facility inventories, organize report data, prepare filings, and coordinate state-specific submission requirements across multiple locations.
Where Is a Tier II Report Submitted?
Covered facilities submit the report to the applicable State or Tribal Emergency Response Commission, Local or Tribal Emergency Planning Committee, and local fire department with jurisdiction over the facility. Many states use an electronic portal, but facilities should confirm whether that submission also satisfies local delivery requirements.
MEET THE AUTHOR
Sarah Gonzalez
I recommend bringing Tier II reporting into the annual facility-planning conversation while there is still time to review the chemical inventory, confirm maximum quantities, update facility information, and resolve jurisdiction-specific questions. Starting early can make the process much easier for any facility with reportable chemical inventory.
EBI can review your chemical inventory, help determine what may need to be reported, prepare the filing, and support the submission process for an individual facility or a group of locations. If you are unsure whether Tier II applies, contact EBI before the March 1 deadline approaches.
Talk with EBI about Tier II reporting: ebiconsulting.com/contact-us